APS Intercooled Twin Turbo
Highly Polished Stainless Steel Ducting



APS Highly Polished Stainless Steel Ducting

The shortest possible routing, equal length, mandrel bent, precision TIG welded, polished 304 stainless steel ducting connects the compressor discharges to the twin intercooler inlets. This contributes to the brilliant boost response of the APS Intercooled Twin Turbo systems.

Again, custom ducting of the same construction as above is utilised to connect the twin APS air cleaners directly to each turbocharger inlet. This provides the most efficient and stylish solution to the issue of sourcing a huge amount of cold air to the turbochargers.

Ducting length is critical on the LS1 TT in order to achieve balanced induction and excellent driveability. By designing the turbocharger to intercooler ducting specifically to be of equal length, each turbocharger experiences exactly the same effective air path to the intercooler which results in totally balanced turbocharger performance. Other systems that are designed with unequal length, experience boost pressure and air movement issues where under certain conditions, one turbocharger pushes air back through the intercooler and into the other turbocharger ducting. As air movement is momentum based, this is simply wasted energy that should be better put towards producing horsepower, not restriction. In addition, these systems of unequal length take the charge air from one turbocharger all the way across the engine bay to the other side in order to enter the single air entry point to the intercooler. This creates a massive restriction compounded even further by having to turn almost 180 degrees in order to enter the intercooler.

The advanced APS dual entry intercooler not only solves this problem but allows APS to utilize true equal length ducting - the most efficient routing for the twin turbo LS1!

Custom flanges in 304 stainless steel ensure bullet proof installation and optimum air flow. In addition, ancillary connections such as those to the blow off valve and blow off valve return lines are positioned for optimum air flow so that the already crisp turbocharger response in accentuated during gear changes.

All hose connection faces are heavily beaded for ultra-reliable hose retention under extreme boost conditions.

A custom molded silicon hose connects the intercooler outlet to the throttle body inlet duct. Again, the shortest possible routing has been utilised.

Click here to see what we've been up to on the race track
Including in car video from Calder and Sandown Raceways